The Jaw Crusher BB 400 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, its efficiency and safety makes it ideal for sample preparation in laboratories and industrial plants.
For small amounts of sample the BB 400 is used batch-wise; for larger amounts it can be operated continuously. Control of the gap width and zero point adjustment allow for reproducible results.
Thanks to the modular construction of housing and frame this jaw crusher is suitable for a wide range of applications.
alloys, basalt, cement clinker, ceramics, chamotte, coal, coke, construction materials, feldspar, glass, granite, minerals, quartz, ores, oxide ceramics, rocks, silicon, slag, …
- High crushing ratio
- Front door facilitates cleaning
- Infinite/continuous gap width setting
- Overload protection
- Wide range of materials for contamination free grinding
- No-rebound feed hopper, removable
- Sample collector with safety switch
- Collecting receptacle with outlet for continuous operation
- Connector for dust extraction
- Special version with automated sorting of undersize (3 fractions) and oversize (1 fraction) (2 – 6 mm available)
The Jaw Crusher BB 400 is a robust and powerful forced-feed crusher. The feed material passes through the no-rebound hopper and enters the crushing chamber.
Size reduction takes place in the wedge shaped area between the fixed crushing arm and one moved by an eccentric drive shaft. The elliptical motion crushes the sample which is moved towards the crushing gap under gravity.
As soon as the sample is smaller than the discharge gap width, it falls into a removable collector within the jaw crusher. The continuous gap width setting with scale ensures optimum size reduction in accordance with the set gap width.
|Applications:||coarse and pre-crushing|
|Field of application:||chemistry / plastics, construction materials, engineering / electronics, environment / recycling, geology / metallurgy, glass / ceramics|
|Feed material:||medium-hard, hard, brittle, tough|
|Size reduction principle:||pressure|
|Material feed size:||< 220 x 90 mm|
|Final fineness:||< 2 mm|
|Material of grinding tools:||manganese steel, tungsten carbide, heavy-metal free steel|
|Jaw width:||220 x 90 mm|
|Gap width setting:||0 – 30 mm|
|Gap width display:||scale|
|Zero point adjustment:||yes|
|Wearing rate display:||yes, up to minus 10 mm|
|Dust extraction unit:||yes|
|Process line version:||optional|
|Collector capacity:||10 l|
|Base frame:||vario frame (adjustable for continous crushing)|
|Drive power:||5.5 kW|
|Electrical supply data:||different voltages|
|Protection code:||IP 55|
|W x H x D closed:||695 x 1399 x 719 mm|
|Net weight:||~ 400 kg|