Shop

Home/Shop

There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour or randomised words which dont look even slightly believable. If you are going to use a passage of Lorem.

  • Request Quote

    ■ Outstanding even grinding quality
    ■ Wear-resistant premium burr
    ■ Powerful three-phase motors with surface cooling and high starting torque – suitable for continuous operation
    ■ Service-free, constantly greased bearings
    ■ Ground material container (capacity 200 l)

    Voltage // frequencies // phases:

    208-220 V // 50 Hz // 3~

    208-220 V // 60 Hz // 3~

    380-415 V // 50 Hz // 3~

    380-415 V // 60 Hz // 3~

    Idle speed: 1440 rpm (50 Hz); 1730 rpm (60 Hz)

    Burr diameter: 130 mm / 5.11 in
    Burr material: 

    • DK15 LS, DM15 LS: Fully hardened special steel
    • DK15 L, DP15 L, DG15 L: Fully hardened special cast steel
    • DK15 LH: Tungsten Carbide

    Grinding capacity – fine* kg / h (ca.): 

    • DK15 L: 105
    • DK15 LS, DK15 LH: 120
    • DM15 LS: 150
    • DP15 L: 200
    • DG15 L: 130

    Grinding capacity – medium* kg / h (ca.):

    • DK15 L: 115
    • DK15 LS, DK15 LH: 130
    • DG15 L: 150

    Hopper capacity ca. 30 kg / 66.13 lb
    Max. nominal power: 2200 W
    Dimensions incl. base (w x h x d): 79 x 155 x 123 cm
    Net weight incl. base: 132 kg

    Dimensions of packing & gross weight: depends on individual version and equipment

    Dimensions Container (w x h x d): 69 x 70 x 79 cm / 200 l

    Standard colours:

    • Grey red structured
    • Grey structured

    SPECIAL EQUIPMENT

    • Burrs for grains or for other grinding goods
    • Special burrs for espresso or for turkish fine grinding
    • Electronically controlled grind adjustment
    • Electropneumatic gate for a controlled grist supply
    • Customized color from RAL catalogue

    Legende:

    • DK15 L (Coffee)
    • DK15 LS (Coffee)
    • DK15 LH (Coffee)
    • DM15 LS (Poppy seed)
    • DP15 L (Pepper)
    • DG15 L (Grains)

    *Depends on the grinding goods and the chosen degree of fineness.
    All measured values under laboratory conditions. Other electric specifications available on request. Subject to change without prior notice.

    Quick View Details
  • Request Quote

    • Outstanding particle size spreads feature high extraction rates and the best possible taste
    • Premium cast steel burrs
    • Robust grinder with high grinding capacity
    • Suitable for different applications: filter, espresso, or turkish fine coffee grinding
    • Grinding of other grists such as spices, grain, poppy-seed and linseed is possible with individual burrs
    • Easy and precise grind adjustment

    Voltage // frequencies // phases:

    100-120 V // 50 Hz // 1~

    100-120 V // 60 Hz // 1~

    200-240 V // 50 Hz // 1~

    200-240 V // 60 Hz // 1~

    Idle speed: 1450 rpm (50 Hz); 1760 rpm (60 Hz)

    Burr diameter: 98 mm / 3.86 in
    Burr material: Cast steel
    Average grinding capacity*: ca. 25 g / s
    Hopper capacity: ca. 1500 g / 3.31 lb
    Max. nominal power: 1300 W
    Dimensions (w x h x d): 23 x 83 x 41 cm
    Dimensions of packing (w x h x d): 37 x 58 x 71 cm
    Net weight: 26 kg
    Gross weight: 30 kg
    Certifications: CE, CB, ETL Safety, ETL Sanitation
    Standards: 

    • IEC/EN 60335-1
    • IEC/EN 60335-2-64
    • ANSI / UL 763
    • CSA-C22.2 No. 195

    Standard colours: 

    • Matt black finestructure
    • Matt white finestructure
    • Copper

    SPECIAL EQUIPMENT

    • Burrs and prebreaker for grains or for other grinding goods
    • Special burrs and prebreaker for turkish fine grinding
    • Large hopper (capacity 800 g / 1.76 lb)
    • Small hopper (capacity 500 g / 1.10 lb)
    • Alignment Tool

    *Depends on the grinding goods and the chosen degree of fineness.
    All measured values under laboratory conditions. Other electric specifications available on request. Subject to change without prior notice.

    #43 Product Datasheet
    Instruction/Operations Manual

    Quick View Details
  • Request Quote


    ■ Capacities to 400 lbs. per hour
    ■ Able to grind bones, seeds, coffee, roots, spices, and minerals
    ■ Adjustable settings for coarse and fine milling
    ■ Cast iron construction

    ■ GM Large Power Mill with discharge spout
    ■ Base frame and motor
    ■ On/Off control with overload protection
    ■ 25 ft. power cord with plug
    ■ V-belt drive pulleys
    ■ Safety belt guard made of galvanized steel

    ■ Mobile base frame with 18″ discharge height
    ■ Mobile base frame with 24″ discharge height
    ■ Mobile base frame with 38″ discharge height

    ■ Large hopper sized three bushel

    ■ Additional grinding burrs – coarse or fine

    *220V- single phase motor in place of 230/460V-3 ph
    *50 hertz electrical packages available

     

    Quick View Details
  • Request Quote


    Polymix™ MFC 90 D features easy to change grinding attachments and sieves extending the range of samples that can be processed. Simple handling, high user safety and efficient grinding results are just a few of the advantages of this mill.

    Polymix™ MFC 90 D features easy to change grinding attachments and sieves extending the range of samples that can be processed. Simple handling, high user safety and efficient grinding results are just a few of the advantages of this mill.

    • Working volume approx. 300mL (volume of the funnel)
    • 600W high frequency 3 phase motor with speed regulation from 50rpm up to 6, 000rpm
    • Integrated overheating, overload and blocking protection
    • Safety switch for automatic off
    • Energy saving through automatic standby mode
    • Hammer grinding or blade grinding attachment
    • Sievesize 2mm

    Power (W): 1000
    Funnel volume: 300 ml
    Product discharge: 0.2 to 6 mm mesh size
    Motor: Wear-free three-phase motor / Gearless direct drive / Security system auto-off
    Speed range: 50 – 6000 rpm
    Sound level: 70 dB(A) for 6000 rpm
    Supply voltage: 100 – 230 V ± 10 %, 50Hz / 60Hz
    Relative humidity (max.): 80 % in storage / 80 % during operation
    Operating temperature: 0 – 40 °C
    Protection class acc. to DIN: IP 20
    Measurements (L x W x H): 325 x 251 x 480 mm
    Weight: 12 kg
    Width (Metric): 251mm
    EMC standards: IEC / EN 61000-6-2  / EN 61000-6-3
    Safety standard: IEC  / EN 61010-2-51

    Quick View Details
  • Request Quote


    ■ Uncomplicated design with range of uses and installations
    ■ Top chamber tilts open for inspection and maintenance
    ■ Heavy ribbed cast iron breaker plate aids in the grinding and milling process
    ■ Rotor shaft 1-3/16″ dia. steel with flange mounted ball bearings and grease fittings Hardened steel hammers, free-swinging, four rows installed in staggered arrangement Hammers are reversible for maximum wear
    ■ Milling chamber has radius tracks for sizing screen
    ■ The Bottom Discharge feature permits easy installation over a pit, hopper or similar and is completely open for full and quick through-put
    ■ The Blower Discharge Mill features a fan which helps in fast grinding by pulling material into the rotating hammers and through the screen
    ■ The Blower fan moves material to another area or upper level to over 20 ft. elevation
    ■ The Blower Discharge unit is well suited for dry, light weight material such as most grains, feathers, foam plastic, feed, dry bedding and much more
    ■ All Hammer Mills are made of durable cast iron and formed steel
    ■ All are finished in standard red enamel

    ■ Stock screen included
    ■ Standard Feed Table
    ■ Base Frame with motor mount (formed & welded steel)
    ■ Electric Motor for *230/460V-3 ph-1750 RPM operation eOn/off control with O.L. protection & enclosure
    ■ 25 ft. power cord with plug
    ■ AII pulleys with v-belt drive for proper speed
    ■ Safety Limit Switch (to stop motor if mill is opened) eSafety Belt Guard with motor cover
    ■ PVC Discharge Skirt (for Bottom Discharge units)
    ■ AII ready for operation

    Requirements Model 1200 Model 2000 Model 3000
    Operating RPM: 3500-3800 3500-3800 2500-3000
    Motor Size
    Bottom Discharge:
    Blower Discharge:
    2 HP
    2-3 HP
    2-3 HP
    5 HP
    7 1/2 HP
    10-15 HP
    Floor Space
    Bottom Discharge:
    Blower Discharge:
    24″ x 36″
    29″ x 36″
    24″ x 36″
    29″ x 36″
    27″ x 36″
    38″ x 40″
    Feed Opening: 6″ x 6-1/4″ 9″ x 6-1/4″ 12″ 6-1/4″
    Hammers Required: 12 18 30
    Shipping Weight
    Bottom Discharge:
    Blower Discharge:
    330 lb.
    360 lb.
    400 lb.
    450 lb.
    475 lb.
    725 lb.

    Quick View Details
  • Request Quote

    The French pressure cell press, or French press, is an apparatus used in  biological experimentation to disrupt the plasma membrane of cells by passing them through a narrow valve under high pressure.

    The French Press can also be used for disintegration of chloroplasts, homogenates of animal tissue, and other biological particles. It is capable of disrupting cell walls while leaving the cell nucleus undisturbed. The press uses an external hydraulic pump to drive a piston within a larger cylinder that contains the liquid sample. The highly pressurized sample is then squeezed past a needle valve. As the sample passes through the valve, the fluid experiences shear stress and decompression, causing cellular disruption.

    A French press is commonly used to break the resilient plasma membrane and cell walls of bacteria and other microorganisms for isolation of proteins and other cellular components. The disruption of cells in a French press generates ‘inside-out’ membrane vesicles which are required for many in vitro biochemical assays.

    • The FRENCH PRESS G-M™ matches the performance of traditional FRENCH PRESSES.
    • Old style Standard PRESSURE CELLS (40 kpsi; 35ml) can be used. Sold separately.
    • Highest pressure hydraulic press commercially available to disrupt the toughest cells.
    • Internal pressures generated within the Standard PRESSURE CELL can attain 40,000 psi.
    • Sample volumes to 35ml with Standard PRESSURE CELL; minimal sample loss.
    • Highly Polished Mirror Finish Stainless Steel Housing: 150 grit electro polished for sanitary applications and for ease of cleaning
    • Large easy to read 6” Hydraulic Pressure Gauge. Mounted prominently on front. Preferred over a tiny digital display.
    • Pressure limits clearly marked on Pressure Gauge.
    • Pressure Regulator Valve offers good control, easy to operate.
    • Ratio Selector Switch is non-mechanical, twin solenoids for long life.
    • Forced air inter-cooler for hydraulic fluid to maintain proper fluid viscosity.
    • Tables for Hydraulic Pressure Gauge reading conversion to Inner
    • PRESSURE CELL pressure conveniently located on front panel.
    • All individual electrical components are UL approved.

    • Automatic Internal Safety Stop prevents Piston from contacting bottom of PRESSURE CELL.
    • Automatic hydraulic pressure release when in full down stop position.
    • Timer will shutdown motor if inadvertently left running (later versions).
    • Prominent E-Stop for added safety.
    • Easy access T-handle holder to secure top of Piston.
    • High, non-skid feet for ease of cleaning underneath.
    • Secure metal ring on platen to hold PRESSURE CELL at bottom in vertical position.
    • Hold-down plate across top to secure PRESSURE CELL in place with two easy-turn nuts.
    • Low sound levels.
    • No pinch points.
    • No hot surfaces.

    RENTAL PROGRAM for FRENCH PRESS G-M™

    It is our pleasure to present this Offer for Rental of the FRENCH PRESS G-M™ (or older FRENCH PRESS versions) and for the Purchase of the Standard PRESSURE CELL (40 kpsi; 35ml).

    The renting allows for extensive testing to prove suitability of this technology before purchase. Additionally, the program allows for completing short term projects without major capital expenditures. Offer is for US and Canada locations. Limited numbers of units are available.

    Rental periods are one month minimum, no time limits. The PRESSURE CELL is not returnable. [/fusion_tab

    Quick View Details
  • Request Quote

    The mixing basket can hold up to 165 pounds in a 55 liter container. Special holders must be mounted for smaller containers. These inserts are custom designed to fit the dimensions of your mixing vessel. The movement of the mixing basket is controlled by a silent pendulum chain drive and the speed can be varied by adjusting the position of the V-belt on the 5-step pulley. An extra slow speed drive is used to bring the mixing basket into its loading position. A hand cart can be purchased to help with loading.


    Motor (kW): 1.1
    Connections (V, Hz): 3 x 220-420, 50/60
    Speed (min-1): 16/20/25/32/40
    Standard Container Size (L): 55L 360 mm x 560 mm diameter
    Container sizes with rubber clamping rings:
    Max load including container: 50 (32-40 min-1)

    75 (16-25 min-1)

    Weight of machine (kg): 800
    Dimensions closed:

    Dimensions open:

    1386 x 1336 x 1025

    1563 x 1556 x 1608

    Quick View Details
  • Request Quote

    The mixing basket can hold up to 66 pounds in a 17 liter container. Twisted rubber clamping rings allow the use of smaller containers up to a maximum diameter of 220 mm. The movement of the mixing basket is controlled by a silent pendulum chain drive. The speed can be varied by adjusting the position of the round drive belt on the 4-step pulley.


    Motor (kW): 0.37
    Connections (V, Hz): 3 x 220-420, 50/60
    Speed (min-1): 15/23/32/44
    Standard Container Size (L): 250 mm x 380 mm diameter
    Container sizes with rubber clamping rings: Max 250 mm x 375 mm diameter
    Max load including container: 30
    Weight of machine (kg): 135
    Dimensions closed:

    Dimensions open:

    880 x 988 x 630

    880 x 988 x 848

    Quick View Details
  • Request Quote


    The mixing basket can hold any form of container having a maximum volume of 2 liters. The containers are fastened in place by twisted rubber rings. The basket movement is driven by elastic drive belts and an eccentric drive gear. The speed can be varied by adjusting the position of the drive belts on its 5 step pulleys. The speed can also be adjusted optional frequency converter set up next to the machine.

    The TURBULA® T2F used in all industries and application fields, especially in research, development, and analysis.


    Motor (kW): 0.18
    Connections (V, Hz) 1 x 110-127, 50/60
    1 x 220-240, 50/60
    Speed (min-1): 23/34/49/72/101
    Standard Container Size (L): Max 2
    Container sizes with rubber clamping rings: Max 130 mm x 215 mm diameter
    Max load including container: 6(23-101 min-1)
    10(23-72 min-1)
    Weight of machine (kg): 38
    Dimensions closed:

    Dimensions open:

    501 x 608 x 393

    501 x 667 x 772

    Quick View Details
  • Request Quote

    A planetary centrifugal mixer specifically for long barrel cartridges, on which 12 oz (360 ml) and 6 oz (180 ml) cartridge can be set.

    • The individual revolution and rotation speed control system achieves uniform mixing of materials in short amounts of time and elimination of ultrafine air bubbles.
    • Productivity and operability can be improved by using cartridges with sizes suited for the amount to be produced (12 or 6 oz).
      * An exclusive adopter (spacer) is required to use 6 oz cartridges.

    Cup size 12oz, 6oz Long barrel syringe × 2pcs
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 seconds × 3 steps
    Step mode 3 Steps Enables to do continuous operation (condition setup) for three different kinds of movement
    Memory channel (condition setting memory) User settable channels Fixed data channels 10CH 10CH
    Power supply voltage Three phase AC200V±10% 50/60Hz
    Power consumption 2.0kW
    External dimensions W646×D662×H730(mm)
    Main unit weight About 225kg

    Quick View Details
  • Request Quote

    Uniform mixing of samples in the microplate and ultrafine air bubble elimination with high speed processing.
    This contributes to improved measurement result reliability.

    • Multiple microplates can be set, so uniform mixing and ultrafine air bubble elimination can be performed simultaneously in a short amount of time.
    • By using an exclusive adopter, mixing and degassing are possible with 18 or 96 well microplates, as well as 384 and 1536 well microplates as full range.
    • Mixing and degassing of micro tubes and culture tubes are also possible by having an adopter (as an option).
    • Total 12 PCR plates or microplates can be handled simultaneously.

    Cup size 6 plates × 2
    (10pcs for 384 well)
    Other containers Depending on adopters, it enables to use various container or syringe.
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 seconds × 3 steps
    Step mode 3 Steps
    Enables to do continuous operation (condition setup) for three different kinds of movement
    Memory channel (condition setting memory)
    User settable channels
    Fixed data channels
    10CH
    10CH
    Power supply voltage Three phase AC200V±10%
    50/60Hz
    Power consumption 2.5kW
    External dimensions W646×D662×H730 (mm)
    Main unit weight About 225kg

    Quick View Details
  • Request Quote


    • Maximum processing amount2kg × 2 cups
    • An order-made mixer compatible with the containers the client currently uses.
    • Maximum compatible container size: 150 mm diameter x 170 mm height
    • Multiple containers can be loaded by using an adopter, and loss of material is reduced by selecting containers according to the production amount.
    • It enables to have certain throughput without adopters.

    2000ml × 2 cups (2kg)

    Cup size User designated (Max about 2000ml x 2 cup)
    Multiple containers and syringes can be used by using an adopter.
    Other containers Multiple containers and syringes can be used by using an adopter.
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 sec. × 5 steps
    Step mode 5 steps
    Continuous operation with 3 different operation patterns (condition settings) is possible
    Memory channel (condition setting memory)
    User settable channels
    Fixed data channels
    90
    10
    Power supply voltage Three phase AC200V±10%
    50/60Hz
    Power consumption 2.5kW
    External dimensions W646 × D662 × H730(㎜)
    Main unit weight Approx. 225kg

    Quick View Details