Shop

Home/Shop
  • Request Quote

    A compact, vacuum function, 1-cup, reasonable model with a simple mechanism.
    With low revolving speed of 400G centrifugal force, it enables to control thermal elevation of materials.

    300ml × 1 cup

     

    Cup size 300ml × 1cup Less than 55cc various syringe type available.
    Other containers Multiple containers and syringes can be used by using an adopter.
    Speed of revolution Settable in 9 steps
    Speed of rotation Rotation follows at fixed ratio as 50% of number of revolutions.
    Settable time 10-300 seconds × 5 steps
    Step mode 5 Step 5 different kinds of motion pattern It can do continuous operation (on condition setup)
    Memory channel (condition setting memory) User settable channels Fixed data channels 90 CH 10 CH
    Power supply voltage Single Phase AC200-230VAC±10% 50/60Hz
    Power consumption 1.5kW
    External dimensions W505 × D597 × H492 (mm) (Pump is separately provided)
    Main unit weight About 80Kg (Pump is separately provided)

    Quick View Details
  • Request Quote

    A high function model with a vacuum reduced pressure function.
    The individual revolution and rotation speed control system and the shifted cup tray enhance mixing performance and provide effective degassing.

    300ml × 2 cups

    Cup size 300ml × 2 cups Less than 55cc various syringe type available.
    Other containers Multiple containers and syringes can be used by using an adopter.
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps (But it can be restricted up to revolution speed)
    Settable time 10-300 sec. × 5 steps
    Step mode 5 steps Continuous operation with 5 different operation patterns (condition settings) is possible
    Memory channel (condition setting memory) User settable channels Fixed data channels 90 10
    Power supply voltage Single phase AC 100V±10% 50/60Hz
    Power consumption 1.5kW
    External dimensions W455 × D540 × H495(㎜)
    Main unit weight Approx. 80kg(Pump is separately provided)

    Quick View Details
  • Request Quote

    90 different revolution-rotation speed patterns are available by varying the ratio of revolution and rotation.
    A high function model for covering from research and development to small-scale production.

    400 ml × 2 cups  Compatible with various types of syringe

    Cup size 400ml × 2cups Various syringes
    Other containers Multiple containers and syringes can be used by using an adopter.
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 sec. × 5 steps
    Step mode 5 steps Continuous operation with 5 different operation patterns (condition settings) is possible
    Memory channel (condition setting memory) User settable channels Fixed data channels 90 10
    Power supply voltage Single phase AC200-240VAC 50/60 Hz
    Power consumption About 1,380W
    External dimensions W400 × D482 × H495(㎜)
    Main unit weight Approx. 50kg

    Quick View Details
  • Request Quote

    Greatly improved mixing performance with the same features as existing models!
    A new advanced function model equipped with the individual revolution and rotation speed control system!!

    400ml × 2 cups

    Cup tray size 400ml × 2 cups
    Other containers Multiple containers and syringes can be used by using an adopter.
    Revolution setting Settable in 9 steps
    Rotation setting Settable in 10 steps
    (0 to 1.0 times with against revolution speed)
    ※ May differ from actual specifications.
    Time of setting 10-300 sec. (in units of 10 sec.)
    Step mode 1-5 steps (Up to 5 types of different operation patterns (conditions) can be set continuously.)
    Memory channels
    (condition setting memory)
    User settable channels 90
    Fixed data channels 10
    Power supply voltage Single phase AC 200 ~ 240V
    50/60 Hz
    Power consumption 2.0 kW (including vacuum pump)
    External dimensions 565 (W) × 682 (D) × 725 (H) (mm)
    (not including projecting parts)
    Main unit weight Approx. 160 kg (not including vacuum pump)

    Quick View Details
  • Request Quote

    A planetary centrifugal mixer specifically for long barrel cartridges, on which 12 oz (360 ml) and 6 oz (180 ml) cartridge can be set.

    • The individual revolution and rotation speed control system achieves uniform mixing of materials in short amounts of time and elimination of ultrafine air bubbles.
    • Productivity and operability can be improved by using cartridges with sizes suited for the amount to be produced (12 or 6 oz).
      * An exclusive adopter (spacer) is required to use 6 oz cartridges.

    Cup size 12oz, 6oz Long barrel syringe × 2pcs
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 seconds × 3 steps
    Step mode 3 Steps Enables to do continuous operation (condition setup) for three different kinds of movement
    Memory channel (condition setting memory) User settable channels Fixed data channels 10CH 10CH
    Power supply voltage Three phase AC200V±10% 50/60Hz
    Power consumption 2.0kW
    External dimensions W646×D662×H730(mm)
    Main unit weight About 225kg

    Quick View Details
  • Request Quote

    Uniform mixing of samples in the microplate and ultrafine air bubble elimination with high speed processing.
    This contributes to improved measurement result reliability.

    • Multiple microplates can be set, so uniform mixing and ultrafine air bubble elimination can be performed simultaneously in a short amount of time.
    • By using an exclusive adopter, mixing and degassing are possible with 18 or 96 well microplates, as well as 384 and 1536 well microplates as full range.
    • Mixing and degassing of micro tubes and culture tubes are also possible by having an adopter (as an option).
    • Total 12 PCR plates or microplates can be handled simultaneously.

    Cup size 6 plates × 2
    (10pcs for 384 well)
    Other containers Depending on adopters, it enables to use various container or syringe.
    Speed of revolution Settable in 9 steps
    Speed of rotation Settable in 10 steps
    Settable time 10-300 seconds × 3 steps
    Step mode 3 Steps
    Enables to do continuous operation (condition setup) for three different kinds of movement
    Memory channel (condition setting memory)
    User settable channels
    Fixed data channels
    10CH
    10CH
    Power supply voltage Three phase AC200V±10%
    50/60Hz
    Power consumption 2.5kW
    External dimensions W646×D662×H730 (mm)
    Main unit weight About 225kg

    Quick View Details
  • Request Quote

    Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products.

    The SM 100 is the budget-priced basic model among the cutting mills. With its strong 1.5 kW drive and 1,500 rpm rotor speed the mill is particularly suitable for routine applications. Cleaning is made particularly easy.

    In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements. The SM 100 can be bench-mounted; alternatively a convenient base frame on wheels is available.

    Application Examples

    Animal Feed, Bones, Cardboard, Drugs, Electronic Scrap, Food, Leather, Lignite, Paper, Animal Feed, Bones, Cardboard, Drugs, Electronic Scrap, Food…

    Product Advantages

    • For routine applications
    • Optimum cutting effects
    • Quick and easy cleaning due to smooth surfaces and push-fit rotor
    • Defined final fineness due to bottom sieves with aperture sizes from 0.25 – 20 mm
    • Wide range of accessories including various hoppers, collection systems, rotors and sieves
    • Highest safety standards

    Function Principle

    Size reduction in the Cutting Mill SM 100 takes place by cutting and shearing forces. The sample comes into contact with the rotor, and is comminuted between the blades and the stationary standard cutting bars inserted in the housing.

    In the 6-disc rotor, spirally arranged reversible hard metal plates operate by cutting in sequence.

    The knives of the parallel section rotor carry out comminution with a powerful cutting action. The dwelling time of the sample in the chamber is short; as soon as it is small enough to pass through the openings of the bottom sieve it is discharged and collected in the receptacle. The rotor speed of 1.500 min-1 ensures gentle and rapid size reduction. 

    Applications: Size reduction by cutting
    Field of application: agriculture, biology, chemistry / plastics, engineering / electronics, environment / recycling, food, medicine / pharmaceuticals
    Feed material: soft, medium-hard, elastic, fibrous
    Size reduction principle: shearing, cutting
    Material feed size* < 60 x 80 mm
    Final fineness*: 0.25 – 20 mm
    Speed at 50 Hz (60 Hz): 1,500 min-1
    Rotor peripheral speed: 9.4 – 11.4 m/s
    Rotor diameter: 129.5 mm
    Types of rotors: parallel section rotor / 6-disc rotor
    Types of hoppers: standard, long stock
    Material of grinding tools: stainless steel, steel for heavy-metal free grinding, tungsten carbide
    Sieve sizes: trapezoid holes 0.25 / 0.50 / 0.75 / 1.00 / 1.50 mm // square holes 2.00 / 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
    Collector systems / capacities: collecting receptacle 5 l / optional: 30 l // collecting unit 0.25 / 0.5 l
    Drive: 3-phase motor
    Drive power: 1,5 kW
    Electrical supply data: different voltages
    Power connection: 3-phase
    Protection code: IP 54
    W x H x D closed: 582 x 1675 x 700 mm (with base frame and standard hopper)
    Net weight: ~ 73 kg without hopper, rotor and base frame
    Standards: CE
    Quick View Details
  • Request Quote

    Cutting mills are suitable for the grinding of soft, medium-hard, elastic, fibrous, and heterogeneous mixes of products. The new cutting mill SM 200 is a powerful and easy-to-operate instrument for efficient primary and fine size reduction. Cleaning is made particularly easy.

    Within the group of the cutting mills, it is the universal standard model which covers a vast range of applications with its strong 2.2 kW drive and 1,500 rpm rotor speed. When operated with the optional cyclone-suction-combination, the SM 200 is also suitable for grinding light sample materials or smaller quantities. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

    Application Examples

    Aluminium Slag, Animal Feed, Bones, Cables, Cardboard, Electronic Components, Feed Pellets, Foils, Food, Leather, Lignite, Material Mixtures, Non-ferrous Metals, Paper…

    Product Advantages

    • Powerful size reduction with 2.2 kW drive
    • Optimum cutting effects thanks to double acting cutting bars
    • Quick and easy cleaning due to fold-back hopper, smooth surfaces and push-fit rotor
    • Defined final fineness due to bottom sieves with aperture sizes from 0.25 – 20 mm
    • Wide range of accessories including various hoppers, collection systems, rotors and sieves
    • Highest safety standards due to engine brake, central locking device, electronic safety check and safety base frame
    • 18 cutting events per rotation with parallel section rotor

    Function Principle

    Size reduction in the Cutting Mill SM 200 takes place by cutting and shearing forces. The sample comes into contact with the rotor, and is comminuted between the blades and the stationary double acting cutting bars inserted in the housing.

    In the 6-disc rotor, spirally arranged reversible hard metal plates operate by cutting in sequence. The knives of the parallel section rotor carry out comminution with a powerful cutting action. The dwelling time of the sample in the chamber is short; as soon as it is small enough to pass through the openings of the bottom sieve it is discharged and collected in the receptacle. The rotorspeed of 1.500 min-1 ensures gentle and rapid size reduction.  The optional cyclone-suction-combination not only has a cooling effect on the sample but also improves the discharge of material from the grinding chamber.

    Applications: Size reduction by cutting
    Field of Application: Agriculture, Biology, Chemistry / Plastics, Engineering / Electronics, Environment / Recycling, Food, Medicine / Pharmaceuticals
    Feed Material: Soft, medium-hard, tough, elastic, fibrous
    Size Reduction Principle: Shearing, cutting
    Material Feed Size: < 60 x 80 mm
    Final Fineness: 0.25 – 20 mm
    Speed at 50 Hz (60 Hz): 1,500 min-1
    Rotor Peripheral Speed: 9.4 – 11.4 m/s
    Rotor Diameter: 129.5 mm
    Types of Rotors: Parallel section rotor / 6-disc rotor
    Types of Hoppers: Standard, long stock
    Material of Grinding Tools: Stainless Steel, Steel for heavy-metal free grinding, Tungsten Carbide
    Sieve Sizes: Trapezoid holes 0.25 / 0.50 / 0.75 / 1.00 / 1.50 mm // square holes 2.00 / 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
    Collector Systems / Capacities: Collecting receptacle 5 l / Optional: 30 l // Collecting unit 0.25 / 0.5 l // Cyclone-suction combination (0.25 l – 30 l)
    Drive: 3-phase motor
    Drive Power: 2.2 kW
    Electrical Supply Data: Different voltages
    Power Connection: 3-phase
    Engine Brake: yes
    Protection Code: IP54
    W x H x D Closed: 576 (1090 opened) x 1675 x 760 mm (with base frame and standard hopper)
    Net Weight: ~ 90 kg without hopper
    Standards: CE

    Quick View Details
  • Request Quote

    Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.

    The high torque of the new 3 kW drive with  RES technology (additional flywheel mass) allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components. Analytical fineness is often achieved in one working run.

    The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Another innovation is the wide, freely selectable speed range from 100 to 3,000 min-1.

    When operated with the optional cyclone-suction-combination, the SM 300 is also suitable for grinding light sample materials or smaller quantities. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

    Application Examples

    Aluminium Slag, Animal Feed, Bones, Cables, Cardboard, Electronic Components, Feed Pellets, Foils, Food, Leather, Lignite, Material Mixtures, Non-Ferrous Metals, Paper, PET Preforms…

    Product Advantages

    • Powerful size reduction thanks to 3 kW drive with high torque and
      RES technology
    • Perfect adaptation to application requirements by variable speed from 100 to 3,000 min-1
    • Optimum cutting effects thanks to double acting cutting bars
    • Quick and easy cleaning due to fold-back hopper, smooth surfaces and push-fit rotor
    • Defined final fineness due to bottom sieves with aperture sizes from 0.25 – 20 mm
    • Wide range of accessories including various hoppers, collection systems, rotors and sieves
    • Highest safety standards due to engine brake, central locking device, electronic safety check and base frame
    • 18 cutting events per rotation with parallel section rotor

    Function Principle

    Size reduction in the Cutting Mill SM 300 takes place by cutting and shearing forces. The sample comes into contact with the rotor, and is comminuted between the blades and the stationary double acting cutting bars inserted in the housing.

    In the 6-disc rotor, spirally arranged reversible hard metal plates operate by cutting in sequence.

    The knives of the parallel section rotor carry out comminution with a powerful cutting action. An additional flywheel mass (RES technology) on the drive shaft produces the exceptional performance of the SM 300. Thanks to the variable speed from 100 to 3,000 min-1, the SM 300 can be easily adapted to different application requirements

    Applications: Size reduction by cutting
    Field of Application: Agriculture, Biology, Chemistry / Plastics, Engineering / Electronics, Environment / Recycling, Food, Medicine / Pharmaceuticals
    Feed Material: Soft, medium-hard, tough, elastic, fibrous
    Size Reduction Principle: Shearing, cutting
    Material Feed Size: < 60 x 80 mm
    Final Fineness: 0.25 – 20 mm
    Speed at 50 Hz (60 Hz): 100 – 3000 min-1
    Rotor Peripheral Speed: 4.7 – 20.3 m/s
    Rotor Diameter: 129.5 mm
    Types of Rotors: Parallel section rotor / 6-disc rotor / V-rotor
    Types of Hoppers: Universal, long stock
    Material of Grinding Tools: Stainless steel, Steel for heavy-metal free grinding, Tungsten Carbide
    Sieve Sizes: Trapezoid holes 0.25 / 0.50 / 0.75 / 1.00 / 1.50 mm // square holes 2.00 / 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
    Collector Systems / Capacities: Collecting receptacle 5 l / Optional: 30 l // Collecting unit 0.25 / 0.5 l // Cyclone-suction combination (0.25 l – 30 l)
    Drive: 3-phase asynchronous motor with frequency converter
    Drive Power: 3 kW with flywheel mass ~ 28.5 kg
    Electrical Supply Data: Different voltages
    Power Connection: 1-Phase
    Engine Brake: Yes
    Protection Code: IP 20
    W x H x D Closed: 576 (1080 opened) x 1677 x 750 mm (with base frame and universal hopper)
    Net Weight: ~ 160 kg
    Standards: CE

    Quick View Details
  • Request Quote

    Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

    The high torque of the new 3 kW drive allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

    The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

    When operated with the optional cyclone-suction-combination, the SM 400 is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

    Application Examples

    Animal Feed, Bones, Cables, Cardboard, Feed Pellets, Foils, Food, Hay, Leather, Lignite, Material Mixtures, Paper, PET Preforms…

    Product Advantages

    • Powerful size reduction thanks to 3 kW drive
    • Optimum cutting effects
    • Accepts large feed sizes up to 170 mm x 220 mm
    • Quick and easy cleaning due to fold-back hopper, smooth surfaces
    • Defined final fineness due to bottom sieves with aperture sizes from 1 – 20 mm

    Function Principle

    Size reduction in the Cutting Mill SM 400 takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

    Thanks to the wide range of accessories, the SM 400 can be easily adapted to different application requirements

    Applications: Size reduction by cutting
    Field of application: Agriculture, biology, chemistry / plastics, engineering / environment / recycling, food, medicine / pharmaceuticals
    Feed material: Soft, medium-hard, tough, elastic, fibrous
    Size reduction principle: Shearing, cutting
    Material feed size: < 170 x 220 mm
    Final fineness: 1 – 20 mm
    Grinding chamber volume: ~7.45L
    Speed at 50 Hz (60 Hz): 280 min-1
    Rotor peripheral speed: 2.25 m/s
    Rotor diameter: 152 mm
    Types of rotors: Parallel section rotor
    Types of hoppers: Universal, long stock
    Material of grinding tools: Hardened steel, tungsten carbide
    Sieve sizes: Trapezoid holes 1.00 / 2.00 mm // round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
    Collector systems / capacities: Collecting receptacle 5 l // optional: cyclone-suction combination
    Drive: 3-phase motor
    Drive power: 3 kW
    Electrical supply data: Different voltages
    Power connection: 3-phase
    Engine brake:
    Protection code: IP 54
    W x H x D closed: 695 x 1399 x 719 mm
    Net weight: ~ 180 kg
    Standards: CE

     

    Quick View Details
  • Request Quote

    EasySieve, the software for particle size analyses, exceeds manual evaluation in many aspects, due to the fact that the software is able to automatically control the necessary measurement and weighing procedures – from the registration of the weight of the sieve up to the evaluation of the data. It is more simple and more comfortable to use than ever before, and, to put it simple, “easy”.

    The new EasySieve CFR version offers compliance with FDA 21 CFR Part 11.

    Application Examples

    Cement Clinker, Chemicals, Coffee, Construction Materials, Fertilizers, Fillers, Flours, Grains, Metal Powders, Minerals, Nuts, Plastics, Sand, Seeds, Soils, Washing Powder, …

    Product Advantages

    • Automatic registration, evaluation and administration of measurement data
    • Logical design, self-explanatory
    • Measurement protocol in accordance with standards
    • Cmplex transformation into charts and tables
    • Dta link of different measurement instruments
    • Atomatic detection and configuration of common analytical scales
    • Cmprehensive data export
    • EasySieve CFR: Itegrated AuditTrail for consistent documentation of every working step of the sieving process
    • EasySieve CFR: Al data is stored in encrypted form in data bases
    • EasySieve CFR: AuditTrail Manager provides four different user levels: from administrator to standard user

    Function Principle

    Parameter entry
    All available parameters (such as sieve stack configuration, dead weight of the sieve, sieve shaker settings) as well as the characteristics, which may have to be calculated, can be entered by clicking with the mouse in the corresponding fields.

    Sieve analysis
    The program accepts automatic and manual data entries from both scale and sieve system. All RETSCH sieve shakers of the series “control” can be automatically controlled with EasySieve®. After the sieve analysis is completed, the loaded sieves are reweighed. By determining the weight difference, the program automatically detects the mass proportions and assigns them accordingly to the corresponding fractions.

    Evaluation
    The EasySieve software calculates all common particle distributions as well as the characteristic values of the particle size, thus making it possible to present the results in standard presentation forms, such as tables and charts. Cumulative throughput or residual values, distribution density and histograms can be included in the standard particle size distributions.

    Data export
    All measured data can be printed, saved and exported as tables and charts. Automatic transfer into the LIMS system is possible.

    Quick View Details
  • The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances.

    With its adjustable speed of 3,000 to 10,000 rpm the rotor beater mill SR 300 is intended for universal use: from sample preparation in laboratories up to preparing sample batches in pilot plants or production facilities. The grinding chamber, the feed hopper and the material inlet are completely made from high quality stainless steel.

    Application Examples

    Bentonite, Chemical Products, Coal, Coke, Drugs, Feed Pellets, Fertilizers, Food, Graphite, Gypsum, Herbs, Pharmaceutical Materials, Plant Materials, Plastics, Resins, Rice, Salts, Seeds…

    Product Advantages

    • Suitable for batchwise operation of larger quantities
    • High final fineness
    • Adjustable speed for different applications
    • Easy cleaning thanks to exchangeable push-fit grinding insert, rotor and cassette
    • Grinding chamber, feed hopper and material inlet and outlet of stainless steel
    • Optional grinding inserts 180° for grinding of hard-brittle materials by additional impact
    • Optional distance rotor to reduce frictional heat
    • Removable hopper for easy cleaning
    • Electric engine brake
    • Defined final fineness due to bottom sieves with aperture sizes from 0.08 – 10 mm
    • Central locking device
    • Wide range of accessories including various collection and feeding systems, rotors and sieves

    Function Principle

    Size reduction and deagglomeration in the SR 300 are achieved by impact and shear effects. The feed material passes from the hopper into the center of the grinding chamber where it is crushed between the rotor, sieve and grinding inserts. As soon as the material is smaller than the aperture size of the sieve it enters the collecting receptacle. The quick-acting door lock ensures easy access to the grinding chamber for quick cleaning. With their safety switch, splashback and access barrier in the inlet and outlet areas, Rotor Beater Mills offer the highest degree of operating safety.

    Applications: size reduction, deagglomeration
    Field of application: agriculture, chemistry / plastics, construction materials, environment / recycling, food, geology / metallurgy, medicine / pharmaceuticals
    Feed material: soft, medium-hard
    Material feed size* < 25 mm
    Final fineness*: < 50 µm
    Speed at 50 Hz (60 Hz): 3,000 – 10,000 min-1 (in steps of 500 min-1)
    Rotor peripheral speed: 22 ..72 m/s
    Types of rotors: standard / distance
    Material of grinding tools: rotor and sieves of stainless steel
    Sieve sizes: trapezoid holes 0.08 / 0.12 / 0.20 / 0.25 / 0.35 / 0.50 / 0.75 / 1.00 / 1.25 / 1.50 / 2.00 mm // round holes 3.00 / 4.00 / 10.00 mm
    Hinged hopper: removeable hopper
    Dust extraction unit: optional cyclone
    Collector capacity: 5 l / optional: 30 l
    Drive: 3-phase motor
    Electrical supply data: 200 .. 240 V
    Power connection: 1-phase
    Engine brake: yes, electric
    Protection code: IP 41
    Power consumption: 2.5 kW
    W x H x D closed: 600 x 1200 x 700 mm (with base frame)
    Net weight: ~ 60 kg (with base frame)
    Standards: CE

    Quick View Details